Technical Conditions
Fan manufacturer's guaranteed value for fan performance
The performance curve of the fan, under the condition of the same air volume, the allowable air pressure difference is less than or equal to 5%.
The deviation of the total pressure value under the above given flow rate is 0.25, and the corresponding flow deviation under the above given total pressure is ≤ 5%.
Fan casing and impeller are cut by numerical control.
Impeller material, spindle material and gas contact part of the material are made in accordance with technical requirements.
The fan casing has good rigidity, no vibration phenomenon, the fan impeller runs smoothly, the body vibration is within the specified range (according to the fan industry standard), and the connection parts of the body are well sealed to ensure no air leakage.
The bearing is lubricated with mechanical lubricating oil. The manufacturer will design a reasonable and reliable bearing lubrication structure according to the requirements of long-term work to ensure that the bearing temperature rise is not greater than 40 ℃, the maximum surface temperature is not greater than 65 ℃, and the bearing has a temperature monitoring device.
Fan and motor adopt integral base structure
The supplier shall provide various documents related to quality assurance, including:
Product inspection certificate;
Material inspection certificate of main parts;
Material test report of main parts;